210804 AXEON EDI-007 Electrodeionization System 7 GPM - 220V 50/60Hz 1PH

SKU:
210804
Brand:
Price
$34,905.64
Stock:
In stock

AXEON® EDI – Series Electrodeionization Systems are a superior option to conventional mixed-bed deionization. EDI does not require regeneration and there are no chemicals
used for operation. Ultrapure water is processed by taking reverse osmosis permeate water and feeding it into the EDI system which uses electricity to continuously drive ions
through deionization resins and ion selective membranes, thus producing a small concentrate stream.

The AXEON EDI – Series Electrodeionization Systems are available in four flow ranges up to 7 gallons per minute (GPM). Additional systems can be arranged in parallel for
increased capacities.

 

Features:

  • Easy Operation with Minimal Instrumentation
  • 2 MΩ Dl Sensor with Red/Green Indicator Lights
  • Compact Aluminum Skid
  • Sleek, Clean, Modular Design
  • Operates Independently from RO System
  • Internal Flow Orifices
  • Includes 5-Micron Pre-filter
  • Feed, Product and Concentrate Sample Ports
  • No Concentrate Recirculation or Brine Injection
  • Thin-Cell Efficient Technology
  • Thin-Concentrate Non-Scaling Technology
  • Unique Non-Scaling Electrode System
  • Patented Excellion™ Membrane

 

Benefits:

  • No Operator Flow Settings; Flow Control is Internal
  • Reliable, Uninterrupted 24/7 Operation
  • Operating Cost (Electrical) is Pennies Per Day
  • Greatly Reduces Disruptive Site Visits
  • Chemical-Free, Environmentally Friendly
  • Flexible – Easy to Expand Modular EDI System Design
  • Reliable –No Recirculation System Components to Fail
  • Ideal Whenever Ion Exchange Tanks are not Economically or Logistically Feasible
  • Ultrapure Water Quality Greater than 2 mΩ / cm (0.05 μS / cm)
  • High Recovery of 90%+
  • Ideal to Lease for Recurring Revenue and Rapid ROI

 

Specifications:

Design
Nominal Capacity (gpm / lpm) 7 / 26.5
Operating Pressure
Nominal -Maximum (psi / bar)
40-75 / 3-5
Nominal Discharge
Concentrate + Electrode (gpm / lpm)
0.7 / 2.65
Nominal Recovery (%) 90
Feed Water Specifications
Feed Conductivity* Optimum FCE <9μS / cm Max FCE 33μS / cm
Total CO2 + HCO3 < 5 mgn CO2 + HCO3· (Optimum < 2 mg / l CO2 + HCO3)
Hardness < 1.0 ppm @ 90% recovery (ask about higher hardness)
Organics < 0.5 ppm TOC
Metals < 10 ppb
Feed Temp Optimum: 15° C-30° C Range: (5° C-35° C)
Feed pH Optimum: 7.0-7.5 Range: 5.0 -9.5
Feed Chlorine ND
Silica, SiO2 < 0.5 ppm
System Component Specifications
Pressure Gauge At Filter Outlet: Stainless Steel Case, Bronze Internals. Glycerin-filled
Pressure Regulator Nickel Plated Bronze 3/4". Set at 40 psi (2.7 bar)
Piping 3/4" PVC, Schedule 80
Valves Inlet Isolation Ball Valve, 2 Sample Valves
Flow Control Product, Concentrate & Electrode Flow Control Orifices
Switches Off/On Switch, Feed Low Pressure Cut-out, Concentrate Low Flow Cut-out
Filters 5 Micron Pre-filter, 4.5" x 10"
Concentrate 1/2" QC
Feed / Product 3/4" MNPT
Product Quality 2 MΩ Dl Quality Indicator with Red/Green Indicator & Alarm
Typical Product Quality: 5 -18.2 MΩ (Depends on FCE* of RO Permeate)
System Electrical
Power Usage – Nominal 600W
Power Usage – Maximum 1.5kW
Electrical Input 178-264 VAC, 50/60Hz, 1–Phase, FLA 20A
System Dimensions
Approximate Dimensions**
L x W x H (in /cm)
25.75 x 25.75 x 60 /
65.41 x 65.41 x 152.40
Approximate Weight (lbs / kg) 161 / 73

 

Note: EDI Systems must have a reverse osmosis permeate feed at 30 -40 psi and a flow rate that is 10% greater than the rated product flow of the EDI.


* FCE = Conductivity + 2.79 (CO2) + 1.94 (SiO2). Example: Conductivity = 5.0μS / cm, CO2 = 3.5 mg / l, SiO2 = 0.5 mg / l, FCE = 5.0+2.79 (3.5)+1.94 (0.5) = 15.71μS / cm
Note: Conductivity (μS / cm) ~ 2.22 TDS (mg / l)
** Does not include operating space requirements.

Q&A

Have a Question?

Be the first to ask a question about this.

Ask a Question

Need help finding a replacement part?

Fill out the part request form and someone will get back to you shortly.